Sanav MU-201 Einstellungsanleitung

SANAV GPS Tracker Utility Setup Guide Revision: 1.0.2 Revision Date: 2013/08/1

10 Charger in Auto ON The device automatically turns ON when plugging in charging cable with power source. 0: Off 1:On Power Key To enable or

11 3.4 Report Settings 3.4.1 Auto Report Field Descriptions Range Report Interval Report time interval Note* the numbers will be rounded to the n

12 3.4.2 Over Speed Settings Field Descriptions Range Over Speed Decect Over Speed Detection ON/OFF 0: Off 1:On Speeding On Threshold Speed Limit

13 3.4.6 Report Tail Field Descriptions Range Report Tail By enabling “Tail Report”, there will be additional information included in each report

14 3.5 Geofence Settings Field Descriptions Range Lat. Latitude dd.dddddd Long. Longitude ddd.dddddd Range Radius in meter 100~9999 meter

15 3.6 Vibration Settings Note: If you have set up VS as well, GPS will be in power saving mode when the device stop moving for more than 3 minute

16 3.7 Power Settings Field Descriptions Range ON User can use the command to set up the power on/off schedule per day of the device. Th

17 4. Button Function Save: To save the setting that has been done. After saving the setting, reboot the MU-201 in order to restore the new setti

18 5. FAQ Please turn ON MU-201 before connecting to PC. Please check if you have installed USB Driver. Please check the correct COM Port in Devi

2 1. Notification ...3 1.1 Introdu

3 1. Notification 1.1 Introduction: This User Manual details how to make the connection from SANAV MU-201 Nano Tracker to your PC. It also details

4 1.4 Document Amendments Revision Date GPS Tracker Utility Version Comments 1.0.1 2012/7/17 V1.01 Optimized for MU-201, MU-58 1.0.2 2013/8/

5 2. Installation 2.1 Connect the device to your PC 1. Install the USB Driver and the GPS tracker Utility in the CD. 2. Turn on MU-201 before conne

6 2.2 Start up GPS Tracker Utility 4. The main screen of GPS Tracker Utility (MU Series). 5. Execute GPS Tracker Utility. Click on “Port” and selec

7 3. Setting Function 3.1 User Settings: Username: At the maximum of 16 letters. (Letters have to be “a~z, A~Z, 0~9, @ - /”) Pin Code: 4 digits o

8 3.2 GPRS Settings：：：： Route : APN: Define the APN for the GPRS communication APN reference: http://forum.gpsgate.com/topic.asp?

9 3.3 Mode Setting：：：： Field Descriptions Range Voice The tracker will respond differently according to the settings when the call center calls